Kettle Dyed Collection: Los Andes

85% Merino wool 15% polyamide

Weight: 100 g / 3.5 oz
Approx.: 80 m / 87 yards
Needle Size: 9 to 10 mm / 13-15 US
Gauge: 2 to 3 stitches per in
super bulky

AslanTrends is pleased to present our “Kettle Hand Dyed Collection”. Introducing 3 new fine Merino wool yarns in fingering, worsted and bulky weights. All yarns are hand dyed in a wonderful selection of colorways. The hand made nature of the yarn means there's no dye lots. Without a doubt these high quality hand dyed yarns will provide a unique look with a super soft and smooth hand for years to come. These yarns are so soft that you can wear your garment right next to your skin. These specially crafted hand dyed yarns are unique on its own. Wonderful colors and gauges have been selected to maximize your sophisticated knitting taste. When working with hand dyed yarns you should be aware that each skein is unique in color even in the same dye lot. As always AslanTrends will have the best hand dyed price in the industry.
Delivery starts june 2009


  • #1331
    ALASKA BLUES

  • #1322
    WORLD OCEANS

  • #1321
    INDIGOS

  • #1327
    JUNGLE RAIN

  • #1335
    VINTAGE

  • #1324
    EARTH SEASONS

  • #1320
    GARDEN SHADES

  • #1319
    GRAPE JAM

  • #1323
    PURPLE HEART

  • #1332
    PINK MIST

  • #1334
    TANGO REDS

While these pictures provide a fairly accurate reproduction of the colours their appearance can vary from computer monitor to computer monitor

LOS ANDES

Los Andes is a dream of a yarn. Hand painted with a flame effect make this yarn a must have. The combination between yarn construction and multiple colors and tones within makes each skein a work of art.
When working with hand dyed yarns you should be aware that each skein is unique in color even in the same dye lot. As always AslanTrends will have the best hand dyed price in the industry.
Delivery starts june 2009

Hand wash in cold water
using mild soap, lay flat
to dry or dry clean.
With the right care
it will last forever.

ASLANTRENDS YARN RACK INSTRUCTIONS

1) box 1 = smaller square box / floor base
2) box 2 = tall thin box / lower and upper tower

Re: box 1

  • Open base box and remove all dowels inside bottom of the base. To remove, unscrew one side of cross bar.
  • Put all dowels aside / will use at the end.
  • Install all 4 wheels in each corner of base bottom. / use small screws.
  • Once you have all wheels installed put base in up right position, wheels on floor.

Re: box 2

  • Open second box and install lower portion of tower base to floor base. / use small screws.
  • Once the lower tower is secured to floor base proceed to install the top tower using the 2 provided mounted small pieces of wood.
  • Flip upward until you find matching hole by rotating top tower.
  • Once you match the hole, proceed to screw top tower with small screws.

Once full tower is secured proceed to arrange all dowels in the sequence that you like the most.

Install top sign with provided small screws (installation of top sign is optional).

Note: use provided black rubber instead of wheels if you want rack not to move.