Invernal

50% Rabbit Angora / 25% Merino Wool & 25% Polyamide

Enjoy the softness of pure Angora. The finest and most luxurious Angora rabbit from South America.

Weight: 100grams / 3.5oz
Approx.: 270meters / 295yards
Needle Size: 4-5mm / 6–8 US
Gauge: 4-5 stitches per inch
Worsted Weight

Carefully crafted & blended to inspire comfort & elegance.

Our natural Angora comes from the long-haired Angora rabbit (not Angora goats - that’s Mohair). Angora rabbit is seven times warmer than traditional sheep’s wool.

This soft Angora wool blend will provide any project or garment instant glamour and a feeling of luxury.

Available in a variety of colors and innovative palates.


  • #1
    WHITE

  • #37
    BONE

  • #3121
    ALUMINUM

  • #19
    MIDNIGHT BLACK

  • #154
    WHEAT

  • #79
    WALNUT

  • #27
    LAUREL

  • #22
    BROWN

  • #20
    KHAKI

  • #162
    ROSEMARY

  • #59
    SKY

  • #5111
    INDIGO INVERNAL

  • #341
    ROSE

  • #39
    RAPSBERRY

  • #28
    SALMON

  • #3752
    PASSION FRUIT

  • #2979
    SCARLET

  • #32
    ROUGE

  • #41
    FUCSIA

  • #46
    WINE

While these pictures provide a fairly accurate reproduction of the colours their appearance can vary from computer monitor to computer monitor

Hand wash in cold water
using mild soap, lay flat
to dry or dry clean.
With the right care
it will last forever.

ASLANTRENDS YARN RACK INSTRUCTIONS

1) box 1 = smaller square box / floor base
2) box 2 = tall thin box / lower and upper tower

Re: box 1

  • Open base box and remove all dowels inside bottom of the base. To remove, unscrew one side of cross bar.
  • Put all dowels aside / will use at the end.
  • Install all 4 wheels in each corner of base bottom. / use small screws.
  • Once you have all wheels installed put base in up right position, wheels on floor.

Re: box 2

  • Open second box and install lower portion of tower base to floor base. / use small screws.
  • Once the lower tower is secured to floor base proceed to install the top tower using the 2 provided mounted small pieces of wood.
  • Flip upward until you find matching hole by rotating top tower.
  • Once you match the hole, proceed to screw top tower with small screws.

Once full tower is secured proceed to arrange all dowels in the sequence that you like the most.

Install top sign with provided small screws (installation of top sign is optional).

Note: use provided black rubber instead of wheels if you want rack not to move.