Ecolana

NEW FALL 2008
60% Alpaca 40% Merino Wool

Our new eco-friendly ecolana yarn is one to be admired. This delicate, soft and gorgeous all natural yarn was created with you in mind.

Weight: 100grams / 3.5oz
Approx: 160 meters / 176 yards
Needle size: 4.5 to 6mm / 7 to 10 US
Gauge: 4 to 5 stitches per inch
Heavy Worsted

Aslantrends is pleased to present ecolana. A yarn created from all natural fibers using environmentally friendly production methods. A sustainable and low impact yarn with no harmful waste to the environment.
No chemicals or dyes, all the natural colors of the alpaca animal.

Please look for our ASLANTRENDS VOLUME 2 pattern book with many CLASS yarn patterns & ideas designed by Melissa Leapman, Dina Mor & Amy Polcyn.


  • #1
    WHEAT

  • #6
    SILVER

  • #7
    LEAD

  • #2
    DESERT SAND

  • #3
    KHAKI

  • #4
    OCHRE

  • #5
    CAFE

  • #14
    TWISTED SAND

  • #12
    TWISTED KHAKI

  • #13
    TWISTED OCHRE

  • #17
    TWISTED TAN

  • #16
    TWISTED STONE

  • #15
    TWISTED GREY

    While these pictures provide a fairly accurate reproduction of the colours their appearance can vary from computer monitor to computer monitor

Hand wash in cold water
using mild soap, lay flat
to dry or dry clean.
With the right care
it will last forever.

ASLANTRENDS YARN RACK INSTRUCTIONS

1) box 1 = smaller square box / floor base
2) box 2 = tall thin box / lower and upper tower

Re: box 1

  • Open base box and remove all dowels inside bottom of the base. To remove, unscrew one side of cross bar.
  • Put all dowels aside / will use at the end.
  • Install all 4 wheels in each corner of base bottom. / use small screws.
  • Once you have all wheels installed put base in up right position, wheels on floor.

Re: box 2

  • Open second box and install lower portion of tower base to floor base. / use small screws.
  • Once the lower tower is secured to floor base proceed to install the top tower using the 2 provided mounted small pieces of wood.
  • Flip upward until you find matching hole by rotating top tower.
  • Once you match the hole, proceed to screw top tower with small screws.

Once full tower is secured proceed to arrange all dowels in the sequence that you like the most.

Install top sign with provided small screws (installation of top sign is optional).

Note: use provided black rubber instead of wheels if you want rack not to move.