Artesanal

40% Cotton / 30% Alpaca / 30% Polyamide

One of our favorite worsted blends. We present you the best quality natural cotton & llama from the region with a touch of polyamide.

Weight: 100grams / 3.5oz
Approx.: 200meters / 218yards
Needle size: 5-6mm / 8–10 US
Gauge: 4 stitches per inch
Worsted Weight

Carefully blended for softness & durability.

Super soft and warm. The Alpaca wool keep the cotton from stretching and the cotton allows for good washing and drying.

Available in a variety of colors and innovative palates.


  • #1
    WHITE

  • #242
    ALPINE GREY

  • NEW #71
    STONE GREY

  • #19
    MIDNIGHT BLACK

  • #256
    EARTH

  • #257
    CINNAMON

  • #2979
    TERRACOTA

  • NEW #3528
    CANDY APPLE RED

  • #240
    LAGOON

  • #218
    CYAN

  • NEW #91
    MEDIEVAL BLUE

  • NEW #135
    EGGPLANT

  • #188
    CHAMPAGNE

  • NEW #180
    RAFFIA

  • NEW #4861
    BRIGHT GOLD

  • NEW #4821
    CHOCCOLATE

  • #36
    CELERY

  • NEW #191
    AVOCADO
    • •

While these pictures provide a fairly accurate reproduction of the colours their appearance can vary from computer monitor to computer monitor

Hand wash in cold water
using mild soap, lay flat
to dry or dry clean.
With the right care
it will last forever.

ASLANTRENDS YARN RACK INSTRUCTIONS

1) box 1 = smaller square box / floor base
2) box 2 = tall thin box / lower and upper tower

Re: box 1

  • Open base box and remove all dowels inside bottom of the base. To remove, unscrew one side of cross bar.
  • Put all dowels aside / will use at the end.
  • Install all 4 wheels in each corner of base bottom. / use small screws.
  • Once you have all wheels installed put base in up right position, wheels on floor.

Re: box 2

  • Open second box and install lower portion of tower base to floor base. / use small screws.
  • Once the lower tower is secured to floor base proceed to install the top tower using the 2 provided mounted small pieces of wood.
  • Flip upward until you find matching hole by rotating top tower.
  • Once you match the hole, proceed to screw top tower with small screws.

Once full tower is secured proceed to arrange all dowels in the sequence that you like the most.

Install top sign with provided small screws (installation of top sign is optional).

Note: use provided black rubber instead of wheels if you want rack not to move.